The RedBaron series of anticollision lights were designed for certified aircraft requirements. They represent the cutting edge in optics design and the use of LED arrays that have been optimized for coverage patterns. This light features highly polished reflectors and is available in either red or white.
40 High brightness LEDs for ANTICOLLISION 360° coverage
The RedBaron XP Aurora™ version incorporates 40 of the brightest LEDs available in the world today, with chromacity and intensity compliant to all international aviation and safety standards. The optical performance is incredible, and these are the ideal replacement unit for any anticollision light system in existence. Unlike our competitors we continually introduce upgraded versions because of the rapidly changing LED technology, so you will never see old LEDs in Aveo lights as you do with other suppliers who are still using low efficiency, low output, less reliable LEDs from 5 to 7 years ago!
Available in RED or WHITE led colors
This light features highly polished reflectors and is available in either red or white color.
Low drag form factor & design
Lowest drag coefficient in the industry as proven in CFD analysis on the University of Michigan Cray Computer cluster.
No separate strobe power box needed
Aveo pioneered the no external power supply design from its inception in the industry and the copycats have yet to match our exclusive circuitry. Quite simply the lowest weight solution you can get, in 9 to 36 volt input range too!
Waterproof / Shockproof / Dust-proof
All Aveo lights are waterproof, dust proof, and inert to most environmental conditions as they are all tested to categories of DO-160 exceeding the applicable requirements by far in external laboratories experienced in compliance demonstration of EASA ETSO appliances.
| Dimensions (mm): | 64 mm x 64 mm x 40 mm |
|---|---|
| Dimensions (inches): | 2.52” x 2.52” x 1.57” |
| Weight (g): | 150 g |
| Weight (oz): | 5.29 oz |
| Operating Voltage Range: | 9 – 36 Vdc |
| PERFORMANCE (WHITE): | |
| Output current at 9..18VDC: | 0.4-0.6A/LED strobe |
| Output current at 18...36VDC: | 0.6A/LED strobe |
| Output power at 9..18VDC: | 52W (78W) in pulse |
| Output power at 18...36VDC: | 78W in pulse |
| Input power at 12VDC: | 59.4W in pulse |
| Input power at 28VDC: | 87W in pulse |
| PERFORMANCE (RED): | |
| Output current at 9..18VDC: | 0.4-0.6A/LED strobe |
| Output current at 18...36VDC: | 0.6A/LED strobe |
| Output power at 9..18VDC: | 35W (53W) in pulse |
| Output power at 18...36VDC: | 53W in pulse |
| Input power at 12VDC: | 59.4W in pulse |
| Input power at 24VDC: | 59.4W in pulse |
| VOLTAGE PROTECTION: | |
| Transcend voltage: | 60V |
| Under-voltage lockout: | 9V not more |
| Over-voltage lockout: | 36V not Less |
| Exceed requirements of: | - ETSO C96a - SAE AS8017a - DO-160 |
| Repetition Rate of Strobe: | 48 cycles per minute |
| Recommended size of mounting screw: | M5x45mm (DIN912) or equivalent (Torque 3.0 Nm [2lb ft]) |
| Waterproof | YES |
| Vibration-proof | YES |
| Shock-proof | YES |
| Dust-proof | YES |
Installation Manual
